×
Home Ojpro 6968 Printer Driver Ojpro 6968 Setup Wireless Setup Ojpro 6968 Wireless Setup HP Officejet pro 6967 Ink HP Ojpro 6968 Scan How to Fax Ojpro 6968 Troubleshooting Ojpro 6968 Error 0x6100004a Not Connecting to Computer HP Ojpro 6968 Printer Reset
HP Officejet Pro 6968 Driver

HP Officejet Pro 6968 Driver

Installing the apt drivers on your system is essential to enable communication between the 123.hp.com/ojpro6968 printer and computer. It will help you establish a wired or wireless network. Download the drivers for HP Officejet Pro 6968 on your system from this site.

HP Officejet Pro 6968 Manual

HP Officejet Pro 6968 Manual

The HP Officejet 6968 manual will help you set up the printer and use it effectively. Troubleshooting instructions are also provided in the manual to help you solve issues that occur with your 123.hp.com/ojpro6968 printer.

How to Setup HP Officejet Pro 6968

  • Setting up the HP Officejet Pro 6968 printer is very simple.
  • First, cut open the seal of the package with a knife.
  • Take out all the accessories from the package and place them aside.
  • Unpack the 123.hp.com/ojpro6968 printer and place it on a flat, steady surface.
  • Peel off the blue tapes from the HP Officejet Pro 6968 printer.
  • Use the power cord provided by HP to connect the printer to the power outlet.
  • Set your preferences and save them. The printer will operate based on it.
  • Install the HP ink cartridges in the respective slots.
  • Download the drivers and connect your 123.hp.com/ojp6968 printer to the computer.
How to Setup HP Officejet Pro 6968
HP Officejet Pro 6968 Ink Cartridge Replace

123 HP Officejet Pro 6968 Ink Cartridge Replacement

  • Check the ink level in the installed cartridges. If the ink cartridge is low on ink, you have to replace it.
  • Lift the cartridge access door upwards and wait till the carriage slides to one side of the printer.
  • Take out the old cartridges from their slots and keep them aside for recycling.
  • Unpack the new cartridges and remove the orange tape and cap on them.
  • Insert them into the respective slots and close the access door.
  • Take a test report to check if you have installed the cartridges properly.

123 HP Officejet Pro 6968 Wireless Setup

  • The steps given here will help you connect your HP printer to the computer wirelessly.
  • Make sure you know the wireless network and password before connecting.
  • Turn on the computer and enable the Wireless feature.
  • Connect the computer to the wireless network by entering the correct credentials.
  • Go to the 123.hp.com/ojpro6968 printer and select the Settings option.
  • Choose Wireless settings followed by the Wireless Setup Wizard option.
  • Follow the instructions displayed on your control panel screen to set up a wireless connection.
HP Officejet Pro 6968 Wireless Setup
HP Officejet Pro 6968 Scan

How to Scan HP Officejet Pro 6968

  • Prior to proceeding to the scan process, check if the printer driver has been installed properly on your system.
  • Lift the scanner lid and position the original document on the scanner bed.
  • Make sure the scanner glass is clean and free of dust.
  • Navigate to Windows and search for 123.hp.com/ojpro6968.
  • Choose your HP printer in the next step.
  • The HP Printer Assistant window will open on your system.
  • Tap the Scan option followed by the Scan a Document or Photo option.
  • Once the HP Scan window opens, you have to select a destination folder to save the scanned file.
  • Click the Scan option again. The printer will scan the document.

HP Officejet Pro 6968 How to Fax

  • Verify whether the telephone cord has been provided along with your HP printer.
  • Next, attach the phone cable to the wall jack and the first line jack available at the rear of the printer.
  • In case you want to connect an answering machine, then connect another phone cable between the machine and the second EXT port of your 123.hp.com/ojpro6968 printer.
  • On the printer’s control panel, navigate to the Fax menu.
  • The following settings can be modified:
    1. Fax Header
    2. Answer Mode/Auto Answer
    3. Rings to Answer
    4. Ring Type
    5. Dial Type
    6. Fax Volume
  • Save your settings, and you can start sending or receiving a fax.
  • Press the Run Fax Test option to print a test report after performing all the tests.

How to Connect to HP Officejet Pro 6968

  • Follow the instructions given below to connect your HP Officejet Pro 6968 printer to the computer.
  • First, check if the printer is turned on and connected to a USB cable.
  • Next, remove the 123.hp.com/ojpro6968 printer from the list of devices to perform a successful setup process.
  • Search for Devices in the Windows OS and then select the Devices and Printers option.
  • Look for your printer model and right-click on it. Click the Remove Device option.
  • If a single printer has multiple icons, then remove all of them.
  • Download the drivers or install it from the installation CD.
  • Double-click on the driver setup file and follow the series of prompts displayed to install the drivers.
  • Halfway through the installation, choose the Connection Method as USB.
  • Connect the USB cable to the computer and printer when prompted.
  • Once you complete the HP Officejet Pro 6968 setup process, take a test print to check if you have installed the drivers correctly.

How to Reset HP Officejet Pro 6968

  • A simple reset will solve all the problems that occur with your printer.
  • Follow the procedure mentioned below to reset your 123.hp.com/ojpro6968 printer.
  • Check if the HP printer is turned on. If not, turn it on.
  • Without turning off the printer, detach the power cord from the power port. Remove the cord from the power outlet as well.
  • Wait patiently for 15 seconds after disconnecting the printer from the power source.
  • Next, connect the power cord to the electrical wall outlet and your printer.
  • Switch on your printer.
  • Your HP Officejet Pro 6968 printer is now reset.

How to Fix HP Officejet Pro 6968 Offline

  • Initially, download the HP Print and Scan Doctor tool to your system.
  • You have to run the HPPSdr.exe file to install it on your computer.
  • Launch the software and tap the Start option.
  • Select your 123.hp.com/ojpro6968 printer from the list.
  • In case your printer is not available there, select Retry.
  • If there is a connection problem, then follow guidelines displayed on the screen to resolve it.
  • Click on the Yes option if it requests you to turn on the printer updates.
  • Tap Yes to follow the prompts and make Officejet Pro 6968 as the default printer.

How to Fix HP OJP6968 Error 0X6100004A

  • There are two cases due to which the error could have occurred.
  • Turn on your 123.hp.com/ojpro6968 printer and wait until the home screen appears.
  • Search for the Back button and press it.
  • The support menu will be displayed on the top part of a blank screen.
  • The next screen displays the letter X within a right and left bracket.
  • Tap the right bracket. The Reset option will be displayed.
  • Choose the Semi-Full Reset option in the next step.
  • Once the printer has been reset, turn off the printer and switch it on after a few minutes.
  • Search the printer for any jammed paper and clear the paper from that area.